Kanchi Construction Chemicals

Additional Information:

• Delivery Time: One day

DESCRIPTION
Sikadur-31 IN is a solvent-free, moisture tolerant,
thixotropic, two part structural adhesive and repair
mortar, based on epoxy resins and special fillers, de-
signed for use at temperatures between +10C and
+40C.
USES
Structural adhesive for bonding:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, Bricks, Blocks, Masonry etc.
Steel, Iron, Aluminium
Wood
Polyester, Epoxy
Glass
Fast setting repair mortar and adhesive for:
Corners and edges
Hole and void filling
Joint arises
Joint filling and crack sealing:
Rigid joint filling
Crack filling and sealing (non moving)
CHARACTERISTICS / ADVANTAGES
Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag and suitable for vertical and
overhead application

Solvent free
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate strengths
Good abrasion & Chemical resistance
Adhesive and filler in one
Impermeable to liquids and water vapour
APPROVALS / STANDARDS
Conforms to ASTM C 881, Type I, Grade 3 Class B+C

MASTER CRETE M-81 is a single component 100% acrylic copolymer admixture specially developed to
improve the properties of cementitious compositions. When it is used with combinations with standard quality
of ordinary Portland cement, it enhances the mechanical properties such as bonding (adhesion) with various

building materials, flexural, compression and impact strength. It improves the thin section fragility of cement
when used as coating.

DESCRIPTION
Sikalastic®-520 Cool Coat Fibers IN is a 1-part, acrylic,
water based, elastic, cold applied liquid membrane
that can be applied directly from the container. It con-
tains addition of cross-linking polymers, special glass
micro fibres, pigments and advanced antifungal addit-
ive that provides long lasting tough waterproofing
membrane. The high solar reflective index of the
membrane provides a heat reflective surface, minim-
ises surface temperature of the membrane and re-
duces heat ingress keeping the interior of the building
cooler and thereby increasing thermal efficiency of the
building. The Product provides a seamless, smooth
waterproof finish which is resistant to UV exposure
and has elastic properties.
USES
Sikalastic®-520 Cool Coat Fibers IN is used for:
▪ Flat and sloping fully exposed roof structures
▪ New construction and refurbishment projects
▪ Waterproofing and renovation of old roof tiles
▪ Waterproofing of external walls and sunshades
Roofs with numerous details such as penetrations,
drains, roof lights and complex geometry
▪
▪ Exterior coating for PVC water tanks

Sikalastic®-520 Cool Coat Fibers IN is used on the fol
lowing substrates:
▪ Concrete and cementitious substrates
▪ Brick, masonry or renders
▪ Unglazed clay tiles
▪ Unglazed ceramic tiles
▪ Asbestos or lime terraced roofs
CHARACTERISTICS / ADVANTAGES
▪ High solar reflectance index (SRI)
▪ Minimises the surface temperature on roof and walls
▪ Reduces energy for cooling of buildings
High adhesion to concrete, render, masonry, corrug-
ated asbestos, bitumen, asbestos cement sheet and
metal decks
▪
▪ Crack-bridging
▪ Highly flexible and vapour permeable
▪ Low VOC content
▪ Resistant to permanent UV exposure
▪ Excellent weather resistance and good service life
High resistance to chloride penetration, hence highly
suitable for saline environment
▪
▪ Good resistance to mould and fungus
▪ Cold applied - requires no heat or flame
▪ Easy application by brush or roller
PRODUCT INFORMATION

DESCRIPTION
Sika Injection-101 IN is a low viscous, fast foaming,
two component polyurethane hydrophobic resin,
which reacts with water to produce a flexible foam. It
is suitable for stopping water leaks and waterproof-
ing of cracks and joints in concrete.
USES
Sika Injection-101 IN may only be used by experi-
enced professionals.
It is used for stopping running water leaks in struc-
tures such as:
Foundations, raft and retaining walls
Below grade structures
Tunnels and underpasses
Sewage systems
Tanks and Silos
Waterways and dams
CHARACTERISTICS / ADVANTAGES
Water reactive grout
Effective sealer of joints, cracks and voids in concrete
Low viscosity
Deep penetration with minimal pressure
Produces a flexible and completely hydrophobic
foam

Easy to apply with single component pump
Suitable for use under hydrostatic pressure
Excellent free foaming up to 40 times
Good resistance to fungi and micro-organisms Environment friendly

DESCRIPTIONSikaLatex® Power is a latex-based, water-resistantmultipurpose admixture for use in areas subject to hu-midity, dampness and continuous water contact.When added to cement mixtures, it improves waterresistance and bonding strength by forming a reinfor-cing polymer that increases long term durability andflexibility of the mix. It is fully soluble in water and isto be added directly to the gauging water of mortar,concrete or cementitious grout.USESSikaLatex® Power is used as bonding agent, water-proof coating and site-mix mortar admixture for thefollowing applications:▪ Bonding of rendering and coating layers▪ Bonding between successive concrete casts▪ Cement grouting and screeds▪ Polymer modified repair mortarsMasonry mortars▪ Renders▪ Tile fixing and panelling▪ Waterproof plastering

Additional Information:

• Packaging Details: 25 kg

Additional Information:

• Delivery Time: 2 hours
• Packaging Details: 160 ml, only

A black bituminous compound covered by a reinforce aluminium film. It is a versatile self-adhesive tape for instant flashing applications. It is ready to apply, weatherproof, with outstanding durability and is economical.

Additional Information:

• Delivery Time: One day

Additional Information:

• Packaging Details: 1.25 kg, available