Sika Waterproofing Chemical

Approx. Rs 1,850 / PieceGet Latest Price

Product BrochureProduct Details:

DESCRIPTION
Sikadur-31 IN is a solvent-free, moisture tolerant,
thixotropic, two part structural adhesive and repair
mortar, based on epoxy resins and special fillers, de-
signed for use at temperatures between +10C and
+40C.
USES
Structural adhesive for bonding:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, Bricks, Blocks, Masonry etc.
Steel, Iron, Aluminium
Wood
Polyester, Epoxy
Glass
Fast setting repair mortar and adhesive for:
Corners and edges
Hole and void filling
Joint arises
Joint filling and crack sealing:
Rigid joint filling
Crack filling and sealing (non moving)
CHARACTERISTICS / ADVANTAGES
Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag and suitable for vertical and
overhead application
Solvent free
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate strengths
Good abrasion & Chemical resistance
Adhesive and filler in one
Impermeable to liquids and water vapour
APPROVALS / STANDARDS
Conforms to ASTM C 881, Type I, Grade 3 Class B+C

Approx. Rs 2,300 / KgGet Latest Price

Product BrochureProduct Details:

DESCRIPTION
SikaTop-107 Seal Plus IN is a flexible, two part, high
performance acrylic polymer modified cementitious li-
quid applied waterproofing coating system. It com-
prises of a liquid polymer and a cement based mix in-
corporating special admixtures. It is applied to con-
crete and mortar to prevent water infiltration with
flexibility. It is available in a user friendly pre-packed
kit form.
USES
Waterproofing applications for various structures
such as:
Raw water concrete tanks, reservoirs, waste water
tanks

Terraces, balconies, sunshades, etc.
Flat and small roofs
Basement and retaining walls
Swimming pools, fountains, water bodies, canals
RCC gutters, drains and planter boxes
Wet areas like toilets, kitchen, utility, sunk slabs
Lift pits, sump, etc.

Interior and exterior waterproofing and damp-proof-
ing of concrete, cementitious rendering, brickwork
and blockwork

Protection of concrete structures against the effects
of de-icing salts and freeze-thaw attack

Pore / blowhole filling
Sealing fine static cracks in concrete structures not
subject to movement

Sealing internal basement walls against dampness
CHARACTERISTICS / ADVANTAGES
Easy to apply by brush, spray or flat trowel
No additional water is required to make the slurry
Pre-batched components with consistent quality
Easy and fast mixing
Highly water resistant, reduces saltpetre action and
prevents carbonation

Protects concrete from chloride penetration
Non-corrosive to steel and iron
Flexible enough to bridge hairline crack
Bonds well to all damp substrates
Good abrasion resistance
Good adhesion to reinforced concrete, mortar ormasonry

Fast curing

Approx. Rs 7,000 / KgGet Latest Price

Product BrochureProduct Details:

DESCRIPTION Sikalastic®-562 IN is a water based ,one component cold applied liquid Polyurethane waterproofing mem- brane that can be applied directly from the container. It provides a seamless, smooth waterproof finish with excellent UV resistance ,excellent crackbridging prop- erties and great aesthetics.It also shows remarkable resistance to ponded/accumulated water and does not get washed away easiliy. It is suitable for both ex- posed and covered roofing applications . USES Flat and sloping fully exposed or covered roof struc- tures ▪ ▪ Podiums & Planter areas (Concealed ) ▪ New construction and refurbishment projects ▪ Waterproofing of external walls ▪ Waterproofing and renovation of old roof tiles Roofs with numerous details such as penetrations, drains, roof lights and complex geometry ▪ The product can be used on the following substrates: ▪ Concrete and cementitious substrates ▪ Brick ▪ Metal ▪ Clay tiles ▪ Unglazed ceramic tiles ▪ Bitumen sheet membranes ▪ Bituminous coatings FEATURES Single Component-can be directly used from pack- aging container ▪ ▪ Excellent crack-bridging and elongation properties ▪ Cold applied - requires no heat or flame ▪ Excellent surface finish and aesthetics ▪ Excellent resistance to UV exposure Excellent resistance to accumulated water ( does not get washed away when ponded with water) ▪ Can be reinforced with geofabric for high tensile strength requirements ▪ ▪ Waterbased-Ecofriendly,with no odour ▪ Foot trafficable ▪ Vapour permeable. PRODUCT INFORMATION Composition Water based Polyurethane ,viscous liquid Packaging 25 kg and 5 kg container Shelf life 12 months from date of production Storage conditions The Product must be stored in original, unopened, undamaged and sealed packaging in dry conditions at temperatures between +5 °C and +30 °C. Protect from frost and direct sunlight. Colour White or Grey Other colours like Terracota on request subject to minimum order quant- ity. Important: Applied colours selected from colour charts will be approxim- ate. Important: For colour matching, apply colour sample and confirm selected colour under real lighting conditions. Important: When product is exposed to direct sunlight, there may be some discolouration and colour variation, this has no influence on the function and performance of the product finish. Density ~1.35 kg/L Solid content by mass ~66 % TECHNICAL INFORMATION Shore A hardness ~75 (ASTM D2240) Tensile strength ~1.5 N/mm2 (ASTM D412) Tensile strain at break ~250 % (ASTM D412) Crack bridging ability Up to 2 mm Tensile adhesion strength ~1.0 N/mm2 (EN 1542).